info@safetysourceonline.com | 1-800-358-4428

Login

School Districts: Pre-Trip Inspection: School Bus – SS7023AE (17 min.)

Watch Video

Please login to take the exam.

1

A pre-trip inspection begins after the driver gets behind the wheel of the bus.

True
False

2

If a driver is unsure how to inspect a certain item on the checklist, they should skip it and report it later.

True
False

3

A brake drum should not be cracked, welded, or obstructed and must have brake pads with at least ¼ inch of wear remaining.

True
False

4

During the air brake test, it is acceptable for the air pressure to fall more than 3 psi in one minute while holding the brake pedal.

True
False

5

Emergency exit windows and roof hatches must sound a buzzer when opened during inspection.

True
False

6

What should you do if the bus is leaning to one side as you approach it?

Ignore it and continue the inspection
Immediately drive it to the mechanic
Inspect for a flat tire or shock issue
Close the emergency exits

7

What should be in the bus in case of an emergency or breakdown?

Fire extinguisher and tire jack
Fire extinguisher, three red triangles, and fluid cleanup kit
Flashlight, jumper cables, and warning signs
Extra seat belt and jack stand

8

What is the minimum tread depth required for front tires?

2/32 inch
1/8 inch
4/32 inch
1/4 inch

9

What should happen when the emergency exit door is opened from the outside?

The strobe light should turn off
The buzzer should sound
The engine should shut down
The lights should blink

10

Which step is included in the 7-step air brake test procedure?

Brake pedal vibration test
Tire rotation test
Test air leakage rate
Exhaust system check